Bright Zinc 400ml, Ambrosol Z355
8.35 $
- Aspect: Tin-Plate can containing under pressure fluid
- Physical state : Pigmented liquid in aerosol
- Flash point: Und. 0° C extremely flammable
- Pressure: at 20°C 5,5 bar
- Relative density: at 20°C 0,71 ÷ 0,75 g/ml
- Propellant: LPG
- Chemical nature: Synthetic resin with inhibiting pigment of corrosion based on zinc dust
- Colour: Inox Steel / light grey
- Powder purity Zn: > 98%
- Odour: Characteristic of solvent
- % Metal in the dry film: 53 %
- % Zinc in the dry film: 3 %
- Resistance Temp.: 300 °C (peak 350 °C)
- Yield: 2/3 mq2
- Drying times = 20°
- Out dust: 10’
- Dry to touch: 20’ :Out dust: 10’
- Dry to touch: 20’
- Dry in depth: 6 hour
- Overpainted after 12 hours
It is a cold galvanizer with high molecular weight. It chemically solidifies producing a long lasting metal coating. It protects all metal surfaces from oxidation. It forms a resistant layer which can be painted or left as a final protection. It is ideal for retouching, finishing, and repairing galvanized parts where a bright grey coat is required.
APPLICATION FIELDS: Surfaces in metal as iron, aluminum, steel. Protection of ferrous metallic structures, pipelines, eaves, enclosures, job tools etc.
HOW TO USE: Carefully clean the surface to be treated, eliminating dirty and traces of rust with synthetic thinner. If necessary, sand with abrasive paper. Turn the can upside-down and shake well until the marbles move freely in-side. To avoid dripping apply twice from a distance of about 20-30 cm. Once finished, spray for 2-3 seconds with the can upside-down to clean the valve and allow for future use.
| Brand | AMBRO-SOL |
|---|
Be the first to review “Bright Zinc 400ml, Ambrosol Z355”
You must be logged in to post a review.
Related products
Reviews
There are no reviews yet.